fn pub static datagram -> Result[UnixSocket, Error] {
  UnixSocket.new(libc.SOCK_DGRAM)
}

fn pub static datagram -> Result[UnixSocket, Error]

Returns a new UnixSocket configured as a datagram socket.

Examples

import std.net.socket (UnixSocket)

UnixSocket.datagram

fn pub static stream -> Result[UnixSocket, Error] {
  UnixSocket.new(libc.SOCK_STREAM)
}

fn pub static stream -> Result[UnixSocket, Error]

Returns a new UnixSocket configured as a stream socket.

Examples

import std.net.socket (UnixSocket)

UnixSocket.stream

fn pub accept -> Result[UnixSocket, Error] {
  let peer = net.raw_socket

  try sys.accept(@socket, mut peer, @deadline)
  Result.Ok(UnixSocket(socket: peer, deadline: net.NO_DEADLINE))
}

fn pub accept -> Result[UnixSocket, Error]

Accepts a new incoming connection from this socket.

This method will not return until a connection is available.

Examples

Accepting a connection and reading data from the connection:

import std.net.socket (UnixSocket)

let listener = UnixSocket.stream.get
let stream = UnixSocket.stream.get

listener.bind('/tmp/test.sock'.to_path).get
listener.listen.get

stream.connect('/tmp/test.sock').get
stream.write_string('ping').get

let client = listener.accept.get
let buffer = ByteArray.new

client.read(into: buffer, size: 4).get

buffer.to_string # => 'ping'

fn pub mut bind(path: ref Path) -> Result[Nil, Error] {
  sys.bind_unix(@socket.inner, path)
}

fn pub mut bind(path: ref Path) -> Result[Nil, Error]

Binds this socket to the specified path or abstract address.

Abstract sockets

Linux supports the concept of an "abstract" socket. These are sockets that don't use regular file paths, instead the path starts with a NULL byte and is followed by zero or more additional (and optional) bytes. While this method supports creating such sockets, this isn't portable across platforms (e.g. macOS and FreeBSD don't support it).

Unnamed sockets

Linux supports the concept of an "unnamed" socket. These are sockets that don't specify a path to bind to, resulting in the kernel assigning them an address. Such sockets are created by using an empty Path as the argument for this method.

On non-Linux platforms this isn't supported and providing an empty Path will result in an Error.InvalidArgument error.

Path sizes

Different platforms enforce different limits on the maximum size of path. For example, on Linux the path size limit is 108 bytes (including the trailing NULL byte). If the path is too long, this method returns an Error.InvalidArgument error.

Examples

Binding a Unix socket to a path:

import std.net.socket (UnixSocket)

let socket = UnixSocket.datagram.get

socket.bind('/tmp/test.sock'.to_path).get

fn pub mut connect(path: ref Path) -> Result[Nil, Error] {
  sys.connect_unix(@socket, path, @deadline)
}

fn pub mut connect(path: ref Path) -> Result[Nil, Error]

Connects this socket to the specified address.

Examples

Connecting a Unix socket:

import std.net.socket (UnixSocket)

let listener = UnixSocket.stream.get
let stream = UnixSocket.stream.get

listener.bind('/tmp/test.sock'.to_path).get
listener.listen.get

stream.connect('/tmp/test.sock').get

fn pub mut flush -> Result[Nil, Never] {
  Result.Ok(nil)
}

fn pub mut flush -> Result[Nil, Never]

Flushes any pending writes to the file system.

Flushing writes is a potentially expensive operation, and unnecessarily calling this method may degrade performance.

When flushing data to disk it's important to remember that the actual behaviour may vary based on the type of file system, operating system and storage hardware that's used. In particular, it's possible for one of these components to say "Yup, I totally flushed the data, you're all good!" when in fact they have not fully flushed the data.

fn pub mut listen -> Result[Nil, Error] {
  sys.listen(@socket.inner, MAXIMUM_LISTEN_BACKLOG)
}

fn pub mut listen -> Result[Nil, Error]

Marks this socket as being ready to accept incoming connections using accept().

Examples

Marking a socket as a listener:

import std.net.socket (UnixSocket)

let socket = UnixSocket.stream.get

socket.bind('/tmp/test.sock'.to_path).get
socket.listen.get

fn pub local_address -> Result[UnixAddress, Error] {
  match sys.unix_local_address(@socket) {
    case Ok(path) -> Result.Ok(UnixAddress(path))
    case Error(e) -> Result.Error(e)
  }
}

fn pub local_address -> Result[UnixAddress, Error]

Returns the local address of this socket.

fn pub peer_address -> Result[UnixAddress, Error] {
  match sys.unix_peer_address(@socket) {
    case Ok(path) -> Result.Ok(UnixAddress(path))
    case Error(e) -> Result.Error(e)
  }
}

fn pub peer_address -> Result[UnixAddress, Error]

Returns the peer address of this socket.

fn pub mut print(string: String) -> Result[Nil, Error] {
  write_string(string).then(fn (_) { write_string('\n') })
}

fn pub mut print(string: String) -> Result[Nil, Error]

Writes the entirety of string to the underlying stream, followed by writing a Unix newline to the stream.

fn pub mut read(into: mut ByteArray, size: Int) -> Result[Int, Error] {
  sys.read(@socket, into, size, @deadline)
}

fn pub mut read(into: mut ByteArray, size: Int) -> Result[Int, Error]

Reads up to size bytes from self into the given ByteArray, returning the number of bytes read.

The into argument is the ByteArray to read the bytes into. The capacity of this ByteArray is increased automatically if necessary.

The size argument specifies how many bytes are to be read.

The return value is the number of bytes read.

The number of bytes read may be less than size. This can happen for different reasons, such as when all input is consumed or not enough data is available (yet).

fn pub mut read_all(bytes: mut ByteArray) -> Result[Int, Error] {
  let mut total = 0
  let mut read_size = INITIAL_READ_ALL_SIZE

  loop {
    match read(into: bytes, size: read_size) {
      case Ok(0) -> return Result.Ok(total)
      case Ok(n) -> {
        total += n

        # To reduce the number of calls to `Reader.read` when there's lots of
        # input to consume, we increase the read size if deemed beneficial.
        if read_size < MAX_READ_ALL_SIZE and n == read_size { read_size *= 2 }
      }
      case Error(e) -> throw e
    }
  }
}

fn pub mut read_all(bytes: mut ByteArray) -> Result[Int, Error]

Reads from self into the given ByteArray, returning when all input is consumed.

The return value is the number of bytes read.

Errors

This method returns an Error if the underlying call to Read.read returns an Error.

fn pub mut read_exact(into: mut ByteArray, size: Int) -> Result[Nil, Error] {
  let mut pending = size

  while pending > 0 {
    match read(into, pending) {
      case Ok(0) if pending > 0 -> throw Error.EndOfInput
      case Ok(n) -> pending -= n
      case Error(e) -> throw e
    }
  }

  Result.Ok(nil)
}

fn pub mut read_exact(into: mut ByteArray, size: Int) -> Result[Nil, Error]

Reads exactly size bytes into into.

Whereas Read.read might return early if fewer bytes are available in the input stream, Read.read_exact continues reading until the desired amount of bytes is read.

Errors

If the end of the input stream is encountered before filling the buffer, an Error.EndOfInput error is returned.

If an error is returned, no assumption can be made about the state of the into buffer, i.e. there's no guarantee data read so far is in the buffer in the event of an error.

fn pub mut receive_buffer_size=(value: Int) -> Result[Nil, Error] {
  set_option(libc.SOL_SOCKET, libc.SO_RCVBUF, value.to_int)
}

fn pub mut receive_buffer_size=(value: Int) -> Result[Nil, Error]

Sets the value of the SO_RCVBUF option.

fn pub mut receive_from(
  bytes: mut ByteArray,
  size: Int,
) -> Result[(Int, UnixAddress), Error] {
  match sys.receive_from_unix(@socket, bytes, size, @deadline) {
    case Ok((read, path)) -> Result.Ok((read, UnixAddress(path)))
    case Error(e) -> Result.Error(e)
  }
}

fn pub mut receive_from(bytes: mut ByteArray, size: Int) -> Result[(Int, UnixAddress), Error]

Receives a single datagram message on the socket, returning the size of the message and the address the message was sent from.

The message is read into the given ByteArray, and up to size bytes will be read.

Examples

Sending a message to ourselves and receiving it:

import std.net.socket (UnixSocket)

let socket = UnixSocket.datagram.get
let bytes = ByteArray.new

socket.send_string_to('hello', address: '/tmp/test.sock'.to_path).get

let received_from = socket.receive_from(bytes: bytes, size: 5).get

bytes.to_string           # => 'hello'
received_from.0           # => 5
received_from.1.to_string # => '/tmp/test.sock'

fn pub mut reset_deadline {
  @deadline = net.NO_DEADLINE
}

fn pub mut reset_deadline

Clears the deadline to apply to socket operations.

fn pub mut send_buffer_size=(value: Int) -> Result[Nil, Error] {
  set_option(libc.SOL_SOCKET, libc.SO_SNDBUF, value.to_int)
}

fn pub mut send_buffer_size=(value: Int) -> Result[Nil, Error]

Sets the value of the SO_SNDBUF option.

fn pub mut send_bytes_to(
  bytes: ref ByteArray,
  address: ref Path,
) -> Result[Int, Error] {
  sys.send_to_unix(@socket, bytes.to_pointer, bytes.size, address, @deadline)
}

fn pub mut send_bytes_to(bytes: ref ByteArray, address: ref Path) -> Result[Int, Error]

Sends a ByteArray to the given address.

The return value is the number of bytes sent.

Examples

import std.net.socket (UnixSocket)

let socket = UnixSocket.datagram.get
let bytes = 'hello'.to_byte_array

socket.bind('/tmp/test.sock'.to_path).get
socket
  .send_bytes_to(bytes: bytes, address: '/tmp/test.sock'.to_path)
  .get

fn pub mut send_string_to(
  string: String,
  address: ref Path,
) -> Result[Int, Error] {
  sys.send_to_unix(
    @socket,
    string.to_pointer,
    string.size,
    address,
    @deadline,
  )
}

fn pub mut send_string_to(string: String, address: ref Path) -> Result[Int, Error]

Sends a String to the given address.

The return value is the number of bytes sent.

Examples

import std.net.socket (UnixSocket)

let socket = UnixSocket.datagram.get

socket.bind('/tmp/test.sock'.to_path).get
socket
  .send_string_to(string: 'hello', address: '/tmp/test.sock'.to_path)
  .get

fn pub mut shutdown -> Result[Nil, Error] {
  sys.shutdown(@socket, read: true, write: true)
}

fn pub mut shutdown -> Result[Nil, Error]

Shuts down both the reading and writing half of this socket.

fn pub mut shutdown_read -> Result[Nil, Error] {
  sys.shutdown(@socket, read: true, write: false)
}

fn pub mut shutdown_read -> Result[Nil, Error]

Shuts down the reading half of this socket.

fn pub mut shutdown_write -> Result[Nil, Error] {
  sys.shutdown(@socket, read: false, write: true)
}

fn pub mut shutdown_write -> Result[Nil, Error]

Shuts down the writing half of this socket.

fn pub mut timeout_after=[T: ToInstant](deadline: ref T) {
  @deadline = deadline.to_instant.to_int
}

fn pub mut timeout_after=[T: ToInstant](deadline: ref T)

Sets the point in time after which socket operations must time out, known as a "deadline".

Examples

Using a Duration results in this method calculating the absolute time after which operations time out:

import std.net.socket (UnixSocket)
import std.time (Duration)

let socket = UnixSocket.datagram

socket.timeout_after = Duration.from_secs(5)

We can also use an Instant:

import std.net.socket (UnixSocket)
import std.time (Duration, Instant)

let socket = UnixSocket.datagram

socket.timeout_after = Instant.new + Duration.from_secs(5)

fn pub try_clone -> Result[UnixSocket, Error] {
  let sock = net.raw_socket

  try sys.try_clone(@socket, mut sock)
  Result.Ok(UnixSocket(socket: sock, deadline: net.NO_DEADLINE))
}

fn pub try_clone -> Result[UnixSocket, Error]

Attempts to clone the socket.

Cloning a socket may fail, such as when the program has too many open file descriptors.

fn pub mut write_bytes(bytes: ref ByteArray) -> Result[Nil, Error] {
  write_all_internal(bytes.to_pointer, bytes.size)
}

fn pub mut write_bytes(bytes: ref ByteArray) -> Result[Nil, Error]

Writes the entirety of bytes to the underlying stream.

Types implementing this method must guarantee that upon returning from this method, either all of the data is written and a Ok(Nil) is returned, or an Error(Error) is returned.

fn pub mut write_string(string: String) -> Result[Nil, Error] {
  write_all_internal(string.to_pointer, string.size)
}

fn pub mut write_string(string: String) -> Result[Nil, Error]

Writes the entirety of string to the underlying stream.

See Write.write_bytes for more details.